JCM 900 w/ Marshall JCM 800 Lead 1960 Brown Grill Full Stack

JCM 900 w/ Marshall JCM 800 Lead 1960 Brown Grill

JCM 900 w/ JCM 800 Lead 1960 Black GrillMarshall PPC412
M.A.P.225dot00plus tax
line
Weekend Rental or Weekday Rental
Weekend Rate Friday - Monday morning or Weekday Daily Rate
Prices subject to change without notice.
Marshall Logo

Marshall JCM900

An incredible Reissue from Marshall, the 100 Watt Marshall JCM900 4100 Dual Reverb offers dual channels operation with a 4-band EQ, and all the powerful Marshall tone that made the original a favorite with players all over. Featuring four ECC83 pre and three 5881 power tubes, this JCM 900 features Reverb and Pre-Gain controls for each channel, and a True Bypass Effects loop for players who crave the most control over their tone.

Features

  • 100-watt Hi Gain Reissue of the popular JCM900 4100
  • All-tube design with ECC83 and 5881 tubes
  • Series FX loop with true bypass operation
  • Two 1/4 inch TS speaker outputs
  • Birch-ply construction
  • 2-button footswitch included

Specifications

  • Type: Tube Amp Head
  • Channels: 2
  • Power: 100 watts
  • Reverb: Dual Reverb
  • EQ: 4-band EQ
  • Tubes
    • Preamp: Three ECC83 (12AX7)
    • Power: Four 5881
  • Inputs: 1/4 inch TS
  • Outputs: Two 1/4 inch TS
  • Additional: Footswitch input and Effects Loop
  • Dimensions (WxHxD): 29.5 x 12.2 x 8.6 inches
  • Weight: 41.5 lbs


User Manual

 

Marshall 1960A

The 1960A is the world’s best selling 4 x 12” speaker cabinet, with a heritage that stretches back to the early 1960s. This authentic 4 x 12” cabinet design, which has changed little since 1962, is the touchstone for all other angled 4 x 12” cabs.

The 300 Watt 1960A has excellent sound projection, which is achieved by angling the baffle so that the top two speakers face upwards slightly, allowing higher frequencies to really cut through. The angle also makes for a better onstage sound, as the sound focus is up towards you, rather than straight out.

Nothing personifies the image of rock ‘n’ roll more completely than a wall of Marshall stacks. Though often imitated, nothing compares to the original. The 1960A is the angled version that features four G12T-75 speakers and is the perfect addition to your stage or recording rig! It’s ideal for players who appreciate clarity and quality.

Marshall 1960A at a Glance:

  • The ultimate in flexibility
  • Clear and true
  • Slightly brighter sound than a straight cab
  • Sonically superior
  • Rugged and ready for the road

The ultimate in flexibility
To ensure the ultimate in flexibility, the 1960A is switchable between mono (4 or 16 ohms) and stereo (8 ohms per side). The two mono impedance options provide extra amp matching capability while the cabinet’s stereo capability makes it ideal for rack systems which typically run in stereo.

Clear and true
The 1960A produces a loud, well-focused, and uncluttered sound with a tight, full low end and a crisp, clear top. It projects well across the guitar’s entire tonal range and its clarity makes it ideal for players who like using a fair amount of effects such as reverb, chorus, or delay as it doesn’t mask or muddy-up such FX. Its all-around versatility and relatively uncolored nature makes this one of Marshall’s best-selling cabs. It represents the sound of the guitar and head most accurately.

The Marshall 1960 cabinets are the best selling amp cabinets in the world. They are standard on stages everywhere for their sound and rugged construction. While not complicated electronically, the effects of their materials, construction, and speakers make the 1960s the choice of players everywhere and have made them the industry standard to this day.

Slightly brighter sound than a straight cab
1960A (angled) cabinets came about because Jim Marshall felt a head on a straight front cab just didn’t look designed. The sides and baffle of the cabinet feature an angled cut. This has both a cosmetic impact and a sonic one, because the top two 12" speakers angle slightly upwards. It has more sonic or dispersion and is a little brighter-sounding than a straight cabinet.

Sonically superior
Marshall is the only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4 x 12" cabs are indeed rock ‘n’ roll history in a stack!

Rugged and ready for the road
Roadworthiness is a vital prerequisite in the world of relentless touring. Luckily, as Marshall’s 40 years of cabinet building attest, Marshall cabinets are definitely built to stand the test of time! Their highly skilled craftsmen construct these 4 x 12"’s from the finest materials available – 15mm birch plywood with precision comb joints, cotton-backed PVC covering, heavy-duty hardware, and the highest quality fittings. Weighing in at around 80 lbs., the JCM1960A is made of 15mm birch plywood (except for the back panel, which is medium density fiberboard) and built for tone, projection, and durability. The majority of cabinet construction is done by hand.

Features

  • 300-watt, 4 x 12" angled cabinet
  • 4/16-ohm mono or 8-ohm stereo
  • 4 x 75-watt G12T-75 speakers
  • Brown grille cloth and white piping
  • Large white logo
  • Black elephant grain vinyl

Specifications

Configuration 4 x 12"
Speakers 4 x 12" Celestion G12T-75
Power Handling 300W
Impedance 16 ohms/4 ohms (Mono), 8 ohms (Stereo)
Cabinet Type Angled
Open/Closed Back Closed
Construction Material Birch
Mono/Stereo Mono, Stereo
Inputs 2 x 1/4"
Height 32.68"
Width 29.92"
Depth 14.17"
Weight 80.25 lbs.
Manufacturer Part Number M-1960A-U
 

Contact