MegaLite DSP 4801II

Available for:  New Purchase

MegaLite DSP 4801II_001

 

MegaLite DSP 4801II_003 MegaLite DSP 4801II_002 MegaLite DSP 4801II_004

Specifications

Key Features

• 2 Input 6 Output connections
• Active sloping crossover filters
• Up to 38 bands of parametric or shelving EQ
• 60 Storage programs
• Up to 630 ms signal delay per signal path
• Security Lock Out mode
• Polarity reversal on each output
• Digital gain adjustment
• Front Panel Control
• Direct USB connection for control via software
Input Section

Input Impedance: 10k0hm,electronically balanced
Maximum input level: +20dBu
Input gain: ±15dB variable in 0.1 steps
Input connector: XLR 3 pin Female 
Input sample rate: 44.1,48,88.2,96kHz
Crossover Filters
Slopes: 6,12,18,24 or 48dB per octave
Type: Bessel, Butterworth or Linkwitz-Riley
Delays: Available on Inputs A,B and Outputs 1,2,3,4,5, and 6
Delay Step: 11 Microseconds minimum
Max Delay: 2.6 Secounds
EQ
Maximum EQ filters: 60 (depending on crossover slopes)
EQ Type: Parametric, Bell or shelving on any filter
Output gain: ±15dB.Variable in 0.2 dB steps
EQ Freq: 15Hz to 20Hkz
Output Section

Output Impedance: <50 Ohm, electronically balanced
Maximum output Level: +20dBu into 600Ohm or greater
Output gain: ±21dB, variable in 0.1 dB steps
Output Connector: XLR 3 Pin Male
Output sample rate: 44.1,48,88.2,96kHz
General Performance
Frequency Response: 15Hz-20kHz
Dynamic Range: 112dB unweighted 22Hz to 22kHz
Channel Separation: 80dB,30Hz to 20 kHz
Distortion (THD): <0.005%,20Hz-20kHz@+10dBu output
Input Metering: -20dB,-12dB.-6dB,-3dB, Clip
(Relative to Clip point)
Output Metering: SIG (40dB.-20dB,-6dB.-3dB,0dB, Over
Indication: 3dB, 0dB, Over (+6db)
AC Power: 110V ac
Physical
Product: 19” x 6.33”x 1.75”
Weight: 6.6 lbs

Contact