Peavey Nashville 400

Peavey Nashville 400
Nashville 400Peavey Nashville 400M.A.P.50dot00plus tax
line
Weekend Rental or Weekday Rental
Weekend Rate Friday - Monday morning or Weekday Daily Rate
Prices subject to change without notice.
Peavey Logo

Peavey Nashville 400

Nashville may be considered the ultimate “Clean Machine” and has been designed to minimize distortion from the input through to the output including the loudspeaker. This system is single channel and features a new pre EQ patch, which allows effects devices to be interfaced before the equalization so that maximum tone coloration may be used to enhance whatever effects devices are chosen.

The power section of this unit features 210 watts RMS (the same as our older Session@ 400 and LTD@) and it delivers this power into a 4 ohm load. The addition of our compression circuit enables the Nashville 400 400 to be louder and cleaner than its predecessors, which were also 210 watts, but did not have the DDT@ compression circuit. On the rear panel we have also included preamp out and power amp input jacks for the all important patch of effects devices post the EQ and also provides the ability to go directly into a studio console or sound reinforcement mixer with the preamp output.

Specifications

RATED POWER & LOAD:

  • 210 W RMS into 4 ohms
    with DDTgcompression and LED indicator
  • POWER @ CLIPPING: (TYPICALLY)
  • (5% THD, 1 KHz, 120 VAC line)
  • 130 W RMS tino 8 ohms
  • 220 W RMS into 4 ohms
  • 2 ohms not recommended

    FREQUENCY RESPONSE:

  • +O, -1 dB, 20 Hz to 20 KHz @ 200 W RMS into 4

    TOTAL HARMONIC DISTORTION:

  • Less than 0.2O/6, 1OOmW to 200 W RMS,
  • 20 Hz to 10 KHz, 4 ohms, typically below 0.1%

    DDT@ DYNAMIC RANGE:

  • Greater than 20 dB

    DDT@ MAXIMUM THD:

  • Below 0.5% THD for 6 dB overload
  • Below 1% THD for 20 dB overload

    HUM & NOISE:

  • Greater than 95 dB below rated power
  • POWER CONSUMPTION: (DOMESTIC)
  • 600 watts, 50/60 Hz, 120 VAC


User Manual