Shure PSM200

Shure PSM200

M.A.P.50dot00plus tax

Weekend Rental or Weekday Rental

Weekend Rate Friday - Monday morning or Weekday Daily Rate

Prices subject to change without notice.
Shure logo

Shure PSM200

The Shure PSM200 Wireless In-Ear Monitor System is part of the Shure PSM 200 personal monitor systems family and is an affordable alternative to floor wedges for entry-level performers. For bands and musicians looking to transition from stage monitors to in-ear monitoring, the PSM200 personal monitor system is for you.

The Shure P2T Tranxmixer has a built-in audio limiter for audio protection, front mounted antenna, two microphone/line input channels for mix control and Input level control, and frequency select for frequency control. These unique features, along with excellent sound quality, make the P2R an exceptional value.

The Shure P2T TransMixer is breakthrough design for personal monitoring. It allows the user to connect two line-level or microphone level inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs, or use line outputs from a mixing console. In short, the PT2 is designed for the working musician, one man band looking for high-end monitoring, and the house of worship band looking to transition from floor wedges to in-ear monitors.

The Shure P2R-H2 Hybrid Bodypack Receiver is the world’s first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. Drummers and keyboard players who stay in the same place during performance benefit from the sonic quality of the P2R. Downstage musicians receive the flexibility to go wireless or stay wired.


  • RF Output Power: 10 – 30 mW (countryspecific)
  • Operating Distance: Up to 100 m
  • Harmonic distortion: 1.5 % typical
  • Signal-to-noise-ratio: 80 dB (A) typical
  • Listening mode: Mono
  • Compatible Systems per band (up to): 4
  • Transmitter Inputs: 2x XLR/6,3 mm combo, mic/line level
    Transmitter Outputs: 2x XLR split outputs
  • Wired Bodypack Option: Yes
  • Personal Mix Control: On transmitter
  • Remoteable Transmitter: No
  • Battery Life: Wired: 6 h; Wireless: 4 h
  • Frequency Response: 30 Hz – 12 kHz
  • Further technical specifications:

    PSM 200 System

    • RF Carrier Frequency Range: 518­-865 MHz (country dependent)
    • Modulation: FM +/- 35 kHz Deviation (Nominal)
    • Operating Temperature: –7 degrees C to +49 degrees C (+20 degrees F to +120 degrees F)

    EP2T TransMixer

    • Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)
    • Antenna: 1/4 Wavelength, semi-rigid, PCB Mount
    • Connector Type: XLR/1/4-inch combo
    • Nominal Input Level: 25 dBu @ 1/2 volume (12 o’clock)
    • Maximum Input Level: 5 dBu @ 1/2 volume (12 o’clock)
    • Current: 170 mA maximum
    • Dimensions: 220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
    • Net Weight: 370 g (13 oz.)

    P2R Receiver

    • RF Sensitivity: 109 dBm typical
    • Squelch Threshold: 102 dBm typical
    • Antenna: Attached Whip
    • Audio Input Connector: Connector Type: 1/4-inch Mono
    • Impedance: 1 megohm
    • Maximum Input Level: LO = +0 dBu; HI = 10 dBu
    • Frequency Response: 30 Hz to 20 kHz (+/ 3 dB); earphone dependent
    • Power Requirements: 9 V alkaline battery, Duracell® type MN1604 recommended
    • Audio Output Connector: 1/8 inch (3.5 mm)
    • Minimum Load Impedance: 8 ohms
    • Net Weight: 100 g (3.52 oz.), less battery
    • Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

pdf icon
Basic Guide

pdf icon
User Manual